Above we have a shot of the satellite and center channel speakers. The speakers are very well made and are on the heavy side, due to the quality magnet used in there construction.
The speakers put out 62 Watts RMS per channel for the satellites and 69 Watts RMS for the center channel.
On the back of the speakers you'll find the two terminal connectors to attach the speaker wires. No cheap 1/4 inch jack is used here like your typical cheap pc speakers; Logitech uses the same approach as home theater systems and uses wires straight to the terminal connectors. To install you simply unscrew the terminal connectors until you see the holes through the center posts, then insert the speaker wire into the holes and tighten the connectors.
Above we have a shot of the back of the Subwoofer/Power amp. The red row of connections are the subwoofers terminal connectors. The speaker wires are connected to the subwoofer by pressing down on the levers on the red terminals and inserting the speaker wire.
The plug in the center connects to the Digital SoundTouch Control Center, and the switch on the bottom is the power on/off switch.
The power amp part of the speaker features two huge heatsinks on its sides to dissipate the heat from the amp. The Subwoofer's power amp can output a total 188 Watts RMS.
Index
RSS Feed
