Above we have some of the parts used for the k8 application. The top diamond part goes underneath the motherboard where the CPU is located and the other is fastened on top the motherboard around the CPU.
Here we have a shot of the various clips included for the different CPU types. The Cooler is setup by default for k8 CPUs, so any other types would require removing the fan and installing the appropriate clip.
To protect the bottom of the heatsink a piece of plastic film with a thicker piece for the center is stuck on the heatsink.
Above is a shot of the nice blue finish and the copper core.
Testing:
Test System
AMD XP 2600+ 333 MHz (AIUHB) (overclocked to Xp 2900 equivalent)
Asus A7N8X Deluxe rev 2.0
Corsair PC2700 XMS 512 MEGS
Thermaltake Lanfire case
Western digital 80 gig 8 meg cache harddrive.
To calculate the idle temperatures, I gave the computer 10 minutes on its own before recording the temperature down. Next, using Sandra burn in wizard I allowed it to run 30 minutes and recorded the readings.
The Magic Cooler performed fairly well and out did the stock cooler. This cooler is not for an overclockers system, but it does offer a better alternative to a stock heatsink.
The cooler has a lot going for it with its good looks, ability to fit on AMD and Pentium processors and its affordable price around 29.99.
Pros:
- Fits All CPU Types
- Nice finish
- Copper core
- Nice performance
- Thermal paste included
Cons:
- Has to be taken apart and reassembled for various cpu types.
Index
RSS Feed
