The igloo 7 aluminum case from BeanTech is a mid sized case that is packed full of features. This black stylish case with its slide off door panels and removable motherboard tray is sure to please.
I’d like to thank Silvia of Beantech for providing us the igloo7 for review.
The igloo 7’s front features four drive bays and two 3.5” drive bays. Also the front has a see through decorative acrylic cover.
The front of the case is easily removable by pulling the bottom of the case forward.
There you have access to the drive bays, and the intake fans.
The back exhaust grill seems adequate enough to allow the rear exhaust fan to blow hot air out un-obstructed.
Specifications:
Igloo7 (P4 & ATX Compatible)
Anodized Aluminum Alloy Medium Tower Case 483(L)X209(W)X442(H)mm
Folded Edges Everywhere to Protect Your Fingers
Thumb Screws Used For Easy Removal & Install
Slide -in Removable Motherboard tray
Easy Removable Front Panel
Total 10 Cleverish Device Bays
4X5.25" & 2X3.5" Opening Device bays with Slide locked Paneling For Quick Mount Devices
4X3.5" Hidden bays With Shock Absorber Silicon Rubber Ring for HDD
2XUSB & 1X1394 Fire wire Ports on Front Panel
Total Three 80mm Cooling Fans
2 At Front Of Case with Rotary Speed control One At rear side To Provide Excellent Airflow For The Best Heat Dissipation
Removable Fan Filter
New Optional Choices:
A: Transparent Side Panel
B: Additional Cooling Fan in Top Cover
C: One -Ball-Bearing Fan
D: Two-Ball-Bearing Fan
One feature that makes this case a pleasure to use is the fact that it has thumb screws on all the areas that you would need quick access. No more routing around for that screw driver!
Index
RSS Feed
