I’d like to thank Victor of Bitspower for providing us with the UV cathode kit for review.
If your looking for an alternative to led fans and cold cathodes, consider going Ultra-violet with a UV cathode kit from Bitspower.
Bitspower’s UV cathode kit comes equipped with everything you need to light up your case. You get a UV cathode, an inverter that can power up to two cold cathodes, an on/off switch, wiring, and Velcro tabs with sticky back tape to install all the components into the case.
Bitspower’s UV cathodes are rated with a life time usage of over 15 000 hours, which should provide adequate long life for the user.
Specification Of UV Cathode Light
Length : 300 mm
Voltage : 570 ± 40 V
Current : 5 mA
Power : 2.85 ± 0.30 W
Brightness : Over 18000 ± 3000 nt (cd/m2)
Lift Time : Over 15000 Hours
Specification Of Inverter
Input Voltage : DC 12 V
Output Current : 5 mA
Support Output : Dual
Special Feature
CE Certificated Report No.: C250205
303mm Acrylic Tube Fully Protected Ended With Acrylic Box Block(Both Ends)
No White Wire in the Light Tube
Fully Protected Retail Box For Delivery
Dual Output Box Inverter
Just Plug & Play
New Design For Fix The Lamp, PAT. Pending
Accessories
16* 16 mm * 2 Set Black Magic Adhesive Tabs For The Light
70*25 mm * 1 Set Black Magic Adhesive Tabs For Inverter.
Extension Wire 60cm For Installation Of The Switch
Installatin Guide and Drill Label For The Switch
Below is a shot of the UV cathode illuminating 2 UV reactive fans.
The UV cathode kit was very easy to install. I had it up and running in about 5 minutes. If you like you can drill a hole in your case and mount the on/off switch, but that will add more time to the installation. The UV of the cathode lights up UV reactive fans quite well and is a nice alternative to regular led fans.
Index
RSS Feed
